Operating instructions

InstallatIon

Assembly Instructions

INTRODUCTION

The model MSA-SB-2600:

Submarine-Accessible Convection Oven contains 88 total

parts for assembly and is designed such that it can be as-

sembled in a submarine’s galley with simple tools.

Sub-Assemblies

The total assembly is broken down into 7 sub-assemblies:

• Main Frame Assembly

• Oven Cavity Assembly

• Control Panel Assembly

• Motor/Transformer Assembly

• Inside Oven Cavity Assembly

• Door Assembly

• Outer Skin Assembly

Time Estimate

The estimated time for complete assembly is approx-

mately 6-7 hours for a rst timer or 4-5 hours for an

experienced assembler. The oven assembly can be

completed with one person, but for a more produc-

tive assembly two people are recommended.

Tools required for assembly:

• Power drill (Cordless drills 12 V or higher)

• Screw driver set

• Screw starter

• Allen wrench set

• Socket Set

• Open wrench Set

• Mallet

Sealant

Use RTV 106 high temperature silicone rubber adhesive

sealant as needed to provide a tight seal to any area that

requires it. Also use Loctite 268 on all fasteners that will

be permanently fastened.