Operating instructions
IMPORTANT NOTICE
NOTES
1. Accutemp griddle mounting;
This version of the Installation Manual for the Market Forge oven model MSA-SB-2600 includes the (4) parts (listed
below) that were modied in order to accept the Accutemp Griddle being mounted on top. All ovens shipped from the
Market Forge factory with a Serial Number less than #226167 will require a back t kit, Market Forge part number 98-
4162, in order to mount the Accutemp griddle. The back t kit includes the updated version of the (4) parts listed below
and installation instructions. A simple replacement of these (4) parts with the back t kit parts will allow the griddle to be
mounted on top. The tools required to perform the replacement are a slotted screwdriver and a 7/16” socket wrench.
List of (4) parts that were modied to accept the Accutemp Griddle;
Part Number Description
98-3571 RIGHT SIDE CHANNEL
98-3572 LEFT SIDE CHANNEL
98-3586 FRONT TOP PANEL
98-3587 REAR TOP PANEL
2. Replacement Reed Switch
This version of the Installation Manual for the Market Forge oven model MSA-SB-2600 includes a new part number for
the Reed Switch (sometimes referred to as a Proximity Switch). Due to alignment issues with the original Reed Switch
a new, more forgiving Reed Switch is now being used. The new Reed Switch part number 08-6615 should be used as a
direct replacement for part number 08-6308 in older model MSA-SB-2600 ovens.
All ovens shipped from the Market Forge factory with a Serial Number less than #225207 will have the original Reed Switch
08-6308. These can be directly replaced with the new Reed Switch 08-6615.