Operating instructions

26
appendix
VERIFICATION CHECK LIST
1. Verify that the doors are properly aligned and that
there is no interference occuring at room temperature
and 400
o
F.
2. Verify that all screws and bolts are tight.
3. Verify that the blower fan can operate at high and low
speeds.
4. Clean oven with a rag and run oven for 2 hours to
burn off oil, clean interior prior to use.
5. Verify that the racks do not bind at 400
°
F.
Verify the accuracy of the oven’s thermostat at 350°F by
comparing the temperature control setting to the tempera-
ture at the center of the oven (one thermocouple). The
maximum difference is to be no more than +/- 5°F.
Wiring Diagram - 480 V, 3 Phase, 11 kW, 60 Hz
Sub-Oven, Convection Oven, No Probe.
Oven Performance
DRA WING NUMBER
RE V.
98-3542
A
C
Figure 55