Operating instructions

InstallatIon

Outer Skin Assembly

4. Have an electrician wire a power supply line through

the raceway conduit rates at 480 VAC, 3 Phase.

5. Install the side frame skin (1) on the right and left side

of the oven. Use one #8-32 pan head screw per side.

Figure 48

6. Install the split top cover (5) and screw the rear cor-

ner to the corner channel using two #8-32 pan head

screws per corner.

7. Lastly install the split top front (6) and fasten to the

split rear using seven #8-32 quarter pan head screws.

Figure 49