User Manual

07
For best results use our Markbass cabinets for LIVE option or our Markaudio P.A. high-quality System
for STUDIO P.A. option.
Into the 5 USER Preset banks you can memorize your presets or copy and modify every Factory Preset.
PRESET RECALL
To recall a preset press the RECALL button, all the banks will appear on the display, select the desired
bank with the UP/DOWN buttons and press ENTER. All the presets will appear on the display, select the
preset you like and press
ENTER to hear it.
Press EXIT to see the preset’s SLOT conguration or to hear the other presets.
Press EXIT from the SLOT menu to go back to the PRESET menu of the last BANK in use.
SLOT
The SLOTs are the locations where you can put the AMP models or eects. Each Bass Multiamp PRESET
contains 8 SLOTs.
You can create the signal routing by putting an AMP and the eects in these locations as you like and
need.
You can also make a chain by adding the eects before or after the AMP, and thanks to the LOOP Send
and Return, add an outboard eect processors or pedals in serial or parallel and in the chain point
wherever you like.
The SLOT # 8 is xed for the CAB SIMULATOR, which obviously must be at the end of the chain.
It is possible to add one AMP at a time.
To have access to each SLOT press the SLOT SELECT button.
Each SLOT contains the following options:
NONE not eect selected
AMP Amplier models
B-TUBEMARKER
B-DRIVE 21
T-CHORUS
MB CH/FL
NINETHY PHASE
REVERB
DELAY
VOLUME PEDAL
NOISE SUPPRESSOR
SEND/RETURN
PAR EQ
MW OCTAVER
SUPER SYNTH
COMPRESSORE
ENV FILTER
STUDIO P.A. per collegamento a P.A. System o a studio monitor.
Per una resa ottimale consigliamo i nostri cabinet Markbass e le nostre Markaudio P.A. high quality
System.
Nei 5 banchi USER Preset si possono memorizzare suoni o copiare e modicare da qualsiasi Factory
Preset.
RICHIAMO DI UN PRESET
Per richiamare un preset premere il tasto RECALL, sul display appariranno tutti i BANCHI, selezionare
un banco con i tasti cursore in alto o in basso, premere il tasto ENTER. In questo modo appariranno sul
display tutti i Preset, selezionate il preset desiderato con i cursori e premere ENTER per ascoltarlo.
Premere EXIT per visualizzare la congurazione degli Slot o continuare nell’ascolto dei PRESETS.
Premendo il tasto EXIT dal menù SLOT è possibile tornare al menù PRESET relativamente all’ultimo
banco utilizzato.
SLOT
Gli SLOT sono locazioni dove poter inserire modelli di AMP o eetti. Ogni PRESET del BASS MULTIAMP
ne contiene 8. In queste locazioni e’ possibile costruire un routing di segnale inserendo un AMPLI ed
eetti a seconda delle esigenze.
E’ possibile costruire una catena inserendo eetti prima o dopo l’ampli e, tramite i SEND e RETURN,
collegare un multieetto esterno ed inserirlo in serie o parallelo in qualsiasi posizione. Lo SLOT N°8 è
ssato per il CAB.
E’ possibile inserire un solo AMPLI.
Ad ogni SLOT si accede con il pulsante SLOT SELECT.
Ogni SLOT contiene le seguenti opzioni:
NONE not eect selected
AMP Amplier models
B-TUBEMARKER
B-DRIVE 21
T-CHORUS
MB CH/FL
NINETHY PHASE
REVERB
DELAY
VOLUME PEDAL
NOISE SUPPRESSOR
SEND/RETURN
PAR EQ
MW OCTAVER
SUPER SYNTH
COMPRESSORE