User Manual
05
BALANCED DI
33) Balanced XLR LEFT Output to send the left channel signal to a mixer/PA (for mono connection use
this output).
34) Balanced XLR RIGHT Output to send the right channel signal to a mixer/PA.
35) Output Level select button (+4/-10dB) related to the output level selected in the proper BALANCED
DI menù.
UNBALANCED LINE OUT Unbalanced stereo output to connect to an external power amp (PRE OUT)
36) LEFT/MONO PRE out left channel (for mono connection use this output).
37) RIGHT PRE out right channel.
38) USB port (for service/maintenance).
MIDI
39) MIDI IN.
40) MIDI THRU.
LOOP If you use external eect processors or pedals you can route them through the LOOP section, it
can be selected in Serial or Parallel mode, and you can set it wherever you like in the signal chain (slot).
41) LOOP SEND Connect this output to your outboard eect processors or pedals input.
42) LOOP RETURN Connect this input to your outboard eect processors or pedals output
28
29 3031
32 33 34
35 36
37 38
39 40
41 42
1
2
3
4
5
6
11
12 13
14
15
16 17 18
19
20
21
22
23
24
9
10
25 26
27
7
8
BALANCED DI
33) Uscita Bilanciata XLR Left. Questa uscita deve essere utilizzata per il collegamento in mono.
34) Uscita Bilanciata XRL Right.
35) Pulsante selezione del livello di uscita (+4/-10dB) rispetto al livello selezionato nel apposito menù
BALANCED DI.
UNBALANCED LINE OUT Uscite sbilanciate stereo per nale esterno (PRE OUT)
36) LEFT/MONO PRE out Left. Questa uscita deve essere usata nel caso di collegamento in mono.
37) RIGHT PRE out Right.
38) USB Uscita per collegamento USB (esclusivamente per service)
MIDI
39) IN Ingresso MIDI.
40) THRU Uscita THRU.
LOOP La sezione Loop può essere utilizzata sia in Serie che in Parallelo ,e può essere posizionata in
qualunque punto della catena audio (slot).
41) SEND Ingresso LOOP. Collega questo jack all’ingresso di un multieetto esterno.
42) RETURN Uscita LOOP. Collega questo jack all’uscita di un multieetto esterno.