Setup guide

NV96xx Virtual Panels

Windows Setup Guide

Physical panels have tactile pushbuttons. Some physical panels have displays; others have GPIO

buttons at the rear of the panel. The virtual panels emulate the buttons and displays of the phys-

ical panels, but of course, have no GPIO connections. Compare, for example, the NV916V with

the NV9616:

(The configurations shown here are samples only; your configurations will differ.)

This document discusses a few configuration issues. If you want to understand panel configura-

tion refer to the NV9000-SE Utilities User’s Guide or its help files, or to the NV9000 User’s Guide

and its associated control panel user’s guides.

Requirements

Virtual panels run under Macintosh and Windows, subject to the following constraints:

• Windows 2000, XP, Vista, or Windows 7.

• Mac OS X, version 10.4.x or newer, with JRE (Java runtime environment) 1.6.0 or newer.

To use a virtual panel, your computer must be connected to an NV9000 router control system’s

control network. Requirements:

Virtual

Physical

NV9000-SE Utilities: revision 6.2.0 or newer NV9601V: SV0697-04 or newer

NV9000: revision 6.2.0 NV9602V: SV0950-02 or newer

Monitor: 1200 horizontal pixels or more NV9603AV: SV0699-04 or newer

NV9605V: SV0701-05 or newer

NV9606V: SV0954-02 or newer

NV9607V: SV0955-02 or newer

NV9609V: SV0807-03 or newer

NV9616V: SV0703-04 or newer

NV9640V: SV0705-05 or newer

NV9641V: SV0707-04 or newer

NV9642V: SV0744-02 or newer

NV9647V: SV1141-00 or newer

NV9654V: SV1167-00 or newer