Setup guide

12
Virtual Control Panels
Notes
S NV9000-SE Utilities requires that you must make at least some slight change to a configura-
tion before you save it. (For example, uncheck an option and then re-check it. The ‘Save’
button will become enabled.)
After creating the new configuration and associated .legends file, the virtual panel should run
properly with the new configuration.
Copies of Configurations
NV9000-SE Utilities has a mechanism by which you can make copies of configurations, but
neglects to copy the configuration’s associated .legends file. If you intend to make copies of a
configuration, open every copy and save it. Here again, NV9000-SE Utilities requires that you
must make at least some slight change to a configuration before you save it. (For example,
uncheck an option and then re-check it. The ‘Save’ button will become enabled.)
S NV9000-SE Utilities runs only under Windows.
Upgrading Old Virtual Panels
If the new virtual panel appears minimized at first launch, drag a corner to resize its window.
Then click anywhere in the black region to get the context menu. There, click ‘Set Default Size’.
Then click ‘Set Font Size’ in the context window and choose one of the font sizes listed.
That will be sufficient to make the panel usable. You can either close the panel or continue with
its setup at this point.