User guide

70 User interfaceOperator UI
12.2 Operator UI
The operater UI is located on the camera left side and consists of three
function buttons plus three assignable buttons.
• 1, 2, 3: The assignable buttons (labeled 1, 2, 3) can be assigned
with functions through the USER button on the main UI.
• REC: Currently not in use.
• PLAY: Currently not in use.
• LOCK: long pressing of the button locks the main and the
operator UI. LED indicates if lock is active. Long pressing again
deactivates the locking.
Figure 57: Operator UI
12.3 EVF UI
The EVF UI is located on the electronic viewfinder. It contains a number
of function buttons and a jogwheel.
• CAM: opens the viewfinder CAM menu
• EVF: opens the viewfinder EVF menu.
• ZOOM: zooms into the image with a 2.25x magnification for focus
checking. This results in matching one sensor pixel to one
viewfinder pixel. Zoom remains active as long as button is
pressed. To keep it activated, press the EXP button while the
ZOOM button is pressed. The ZOOM function will remain
activated until the ZOOM button is pressed again.
• EXP: changes the EVF gamma from Rec709 video to Log C (no
matrix) as long as the button is pressed. To keep it activated after
the button press, press the ZOOM button while the EXP button is
pressed. The log gamma will remain active until the EXP button is
pressed again.