User guide

User interface Main UI 61
− Legal: Uses values 64-960.
− Extended: uses values 5-1019. Results in about 10% more
steps.
Note: Check which mode your recorder supports. If you set the camera to
extended, but your recorder only supports legal, you will end up with clipped
images!
• Link sensor fps: If set to "On", the sensor will always follow the
REC OUT frame rate setting. This ensures no frames are dropped
on the output.
Figure 44: MENU>REC OUT
Note: Only use double shielded HD-SDI cables for recording to ensure error free
data transmission!
12.1.5.2 Monitoring
The Monitoring section defines setup of MON OUT and EVF-1 electronic
viewfinder. These are outputs meant for monitoring, not for recording
of images.
The frame lines setup applies to both MON OUT and EVF-1. Frame lines
can of course be switched on or off individually for MON OUT and EVF-
1.