User guide

User interface Main UI 59
12.1.5 Menu
The menu contains parameters for the basic camera setup. It has a tree
structure and the current path in the menu is displayed in the top
section of every screen.
To access a new menu level, select the group with the jogwheel and
press the jogwheel. This will open the next level.
To go one level back up, press BACK. A parameter has its value
displayed at the right part of the screen. Select it with the jogwheel and
press the jogwheel to edit it.
Cancel an edit action by pressing BACK, confirm the setting by clicking
the jogwheel.
Figure 42: MENU
12.1.5.1 Recording
Set the parameters of the REC OUT as well as the gamma of the
recorded images.
• Gamma defines the contrast curve that is applied to the images.
The user can choose between REC709 video and CINEON log.
− REC709 video: Gamma according to ITU.R-BT709 standard.
Images are prepared for playback on standard broadcast
monitors
− Log C (no matrix): Gamma according to Cineon specification.
Images are prepared for output to film material or DI-like
treatment. Images will appear flat on a standard broadcast
monitors, the use of external devices to apply a LUT, such as
TCube, is a must to get visually pleasing images on a
monitor.