User guide

54 User interfaceMain UI
• All frame rate settings should be correct now.
12.1.4.3 SHUTTER
Pressing the SHUTTER screen button in the Homecreen opens the
Shutter user list. By default, shutter angles 11.2, 22.5, 45, 90, 172.8, 180,
270 and 358 are contained in the list.
Figure 34: Shutter list
To add a new entry to the list, press the ADD button. This opens the Set
shutter screen.
In this screen, the new list entry can be set with the jogwheel. With the
screen buttons the value can be in- or decreased in bigger steps.
First set the integer value with the jogwheel, clicking it will start edit on
the fractional part.
Note: A maximum of 16 entries is supported by the list. After reaching this
number of entries, it is no longer possible to add entries without deleting others
first.
Figure 35: Add Shutter angle