User guide

50 User interfaceMain UI
12.1.4.1 Lists and User Lists
The Homescreen screen buttons FPS, SHUTTER, WB (White Balance)
and EI (Exposure Index) open lists that contain preconfigured values for
the respective setting.
Except for EI, all lists are user lists where the user can store a selection
of his preferred settings for quick access.
To select a preset, turn the jogwheel until the selection bar is on the
desired value and press the jogwheel.
If the list lacks the required setting, press the ADD screen button. This
opens a screen where the desired value can be set. Either by using the
jogwheel for in- or decrementing the value, or additionally use the
screen buttons for bigger adjustment steps.
When the desired value is set, press the jogwheel to add the value to
the list.
Note: A maximum of 16 entries is supported by the list. After reaching this
number of entries, it is no longer possible to add entries without deleting others
first.
List values no longer required can be deleted by pressing the DELETE
screen button. This opens a screen where the values desired for
deletion can be selected with the jogwheel. To delete the selected
value, press the two lower outer screen buttons simultaneously.
Note: It is not possible to delete a list completely. When the last list entry is
reached, deletion is disabled.
Note: The Exposure Index list is static and cannot be changed by the user. It
contains ASA values from 160-1600 ASA in steps of 1/3 stop.
Figure 30: List example: User list fps