User guide

Connectors BAT 35
10.1 BAT
The BAT connector can be used to power the camera from an external
power source with cables KC-20S and KC-29S.
It is located on the camera back lower right.
10.2 REC OUT 1&2
The REC OUT consists of two BNC plugs capable of carrying 1920x1080
1.5G HD-SDI signals with frame rates from 23.976 to 60 fps according to
SMPTE standards 274M, 292M and 372M.
It is located on the camera back mid right.
10.3 RET/SYNC IN
This BNC connector is currently not in use.
It is located on the camera back mid right.
10.4 MON OUT
The MON OUT is a single BNC connector capable of carrying a
1920x1080 422 YUV 1.5G HD-SDI signal with frame rates of 23.976, 24,
25, 29.97 or 30 fps according to SMPTE standards 274M and 292M. Its
configuration can be changed with the camera menu.
It is located on the camera back upper right.
10.5 EXT
The EXT connector is a multi-pin accessory connector. It carries signals
for communication with various accessories.
Cables are currently available for:
• Connecting a UMC-3 remote motor controller
• Connecting two ALEXA cameras for synchronized operation
The connector is located on the camera back mid right.