User guide

Installation of The Camera Bridge Plate adapter BPA-1 31
9.7 Bridge Plate adapter BPA-1
The bridge plate adapter BPA-1 can be used to attach a BP-5/BP-8 to
ALEXA. First attach the BPA-1 to the camera with the two screws. Then
attach the BP-5/BP-8 to the adaptor with its two screws. Make sure the
screws are tightened firmly with a screwdriver.
9.8 Leveling Block LB-1
The leveling block LB-1 attaches to the bottom of the ALEXA back foot.
It prevents the camera from resting on a back mounted battery when
placed on a flat surface.
It is mounted by inserting its top lid into the corresponding channel on
the end of the shoulder arc in the camera base. Twist the knob
clockwise to tighten.
9.9 Shoulder Pad SP-3
The camera base has an integrated arch to fit to the operator's
shoulder. For extended handheld shoots, the newly designed shoulder
pad SP-3 can be attached to the base of the camera with velcro.