User guide

Power Supply Power Outputs 23
8.8 Power Outputs
The camera has three power outputs for accessories, 2x 24 V and 1x 12
V.
Figure 7: 24 V outputs (RS) and 12 V output
8.8.1 12 V Accessories
The 12 V output is located on the right side of the camera. It has a 2-pin
LEMO connector and can supply a device with a current of up to 3 A,
depending on the camera power supply.
8.8.2 24 V Accessories
The two 24 V outputs are located on the right side of the camera. They
are labeled RS and have a 3-pin LEMO connector. They can supply two
devices a combined load of up to 3 A, depending on the camera power
supply.
Besides powering accessories, these sockets can also be used to send a
remote start + stop signal to the camera.