User guide

Power Supply Onboard Batteries 19
Available from ARRI is the battery CINE VCLX/2 battery (280 Wh) with
charger.
To connect the battery to the camera:
• Ensure that the main switch on the camera is off.
• Plug the battery cable KC-20S or KC-29S (spiral cable) into the
power supply socket on the camera and the battery 28 V output
socket.
Note: When the battery voltage drops below the warning level, the BAT1 level
in the camera display will start flashing. A white "i" will appear, signaling more
information is available on the INFO screen.
Note: For more information on setting the low battery warning level, see
Menu>System>Power (on page 66).
Charging the battery
• Connect the charger to AC mains power.
• Plug the charger cable into the charge input socket of the battery.
• Once charged, batteries may be kept on the charger until
required.
Note: For more information on CINE VCLX/2 battery and charger, please check
the corresponding manual.
8.5 Onboard Batteries
The camera can be equipped with adapters for either V-Mount or Gold
mount video-style batteries.
The following adapters are available:
• BAT-V: Top-mount adapter V-Mount batteries
• BAB-V: Back-mount adapter V-Mount batteries
• BAT-G: Top-mount adapter Gold mount batteries
• BAB-G: Back-mount adapter Gold mount batteries
Note: Adapters must be installed by a trained technician!