User manual

24 MAC 101 user manual
Onboard control menus
Menu Item Options Notes (Default settings in bold print)
DMX ADDRESS
1 – 501 (RAW/RGB)
1 – 505 (BASIC)
DMX address (default address = 1). The DMX address
range is limited so that the fixture will always have
enough DMX channels in the 512 available.
CONT MODE
RAW RGB uncalibrated DMX control mode
RGB RGB calibrated DMX control mode
BASIC Basic DMX control mode
PERSONALITY
P/T SETTING
P/T SPEED Pan and tilt speed normal / fast / slow
SWAP
Swap pan and tilt (pan commands move tilt and vice
versa) - off / on
PAN INVERT Pan inversion (reverse direction pan control) - off / on
TILT INVERT Tilt inversion (reverse direction tilt control) - off / on
FANS
REGULATED Cooling fan speed thermostatically regulated
FULL Max. cooling fan speed
DIMMER
CURVE
LINEAR Linear dimming curve
SQUARE LAW Square law dimming curve
INV SQUARE
LAW
Inverse square law dimming curve
S-CURVE S-curve dimming curve
DIMMER
SPEED
FAST Fast dimming with unrestricted speed
SMOOTH Smooth dimming with restricted speed
DMX RESET
OFF Disable reset via DMX
ON Enable reset via DMX
DISPLAY
ON Display is always on
2MN
Display switches off and goes into Sleep mode if the
controls have not been pressed for 2 minutes.
5MN
Display switches off and goes into Sleep mode if the
controls have not been pressed for 5 minutes
10MN
Display switches off and goes into Sleep mode if the
controls have not been pressed for 10 minutes
DISPLAY
INTENSITY
10-100 Display intensity. Default=100
ERROR MODE
NORMAL
Display errors at 100% intensity (regardless of
DISPLAY INTENSITY setting) and illuminate the
service light
SILENT
Silent error mode. The error message does not appear in
the display, but the service lamp is illuminated
TOP HAT
DISABLE No tilt limitation
ENABLE
Tilt limited by a few degrees to avoid collision between
top hat and base at maximum tilt – enable this setting
before installing a top hat
FACTORY
SETTING
FACTORY
DEFAULT
LOAD
Return all settings (except calibrations) to factory
defaults
NB: can take up to 2 minutes to complete!
Table 3: Control menu