User Guide

Model 3i Digital Force/Torque Indicator User’s Guide

Thank you…

Thank you for purchasing a Mark-10 Model 3i digital force / torque

indicator, designed for use with interchangeable remote force and

torque sensors. A 3i-sensor combination can be used with some Mark-

10 test stands grips, and data collection software.

With proper usage, we are confident that you will get many years of

great service with this product. Mark-10 instruments are ruggedly built

for many years of service in laboratory and industrial environments.

This User’s Guide provides setup, safety, and operation instructions.

Dimensions and specifications are also provided. For additional

information or answers to your questions, please do not hesitate to

assist you.

Before use, each person who is to use a Model 3i indicator should

be fully trained in appropriate operation and safety procedures.

TABLE OF CONTENTS

OVERVIEW .........................................................2

POWER ...............................................................4

MECHANICAL SETUP .......................................5

HOME SCREEN AND CONTROLS ...................7

DIGITAL FILTERS ..............................................9

SET POINT INDICATORS ............................... 10

OPERATING MODES ...................................... 10

CHANGING THE UNITS .................................. 11

COMMUNICATIONS AND OUTPUTS ............ 11

CALIBRATION ................................................ 13

OTHER SETTINGS .......................................... 17

SPECIFICATIONS ........................................... 20