Installation Instructions

//Data2/MarineSync-Sales Marketing/Approved Technical Docs/RUM

The following section contains installation and wiring instructions for the MarineSync RUM Transponder

in an outdoor enclosure (pedestal). If technical assistance is required at any point during the installation,

contact information can be found on the first page of this manual. MarineSync Corporation is not

responsible for damage to the transponder or pedestal caused by incorrect wiring.

Safety Precautions

WARNING

• Installation of RUM Transponders requires working with possibly hazardous

voltages. These instructions are meant to be a supplement to aid trained,

qualified professionals.

• Turn off all power supplying the equipment before performing any wiring

operations. Use a properly rated voltage sensing device to confirm power is

off.

• Installations should be done in accordance with local codes and current

National Electric Code requirements.

• Equipment used in a manner not specified by this document impairs the

protection provided by the equipment. Failure to follow these warnings

could result in serious injury or death.