User manual
MPC-ML10DVR-UM(B) 4/2011 27
Mechanical Drawings
Mount diagrams of the MPC-ML10DVR and its dimensions may assist you in installation of
the Monitor. You may nd them on our website at:
http://www.marinepc.com
Mount diagrams of the optional Flush Mount Bezel and its dimensions may assist you in
installation of the Monitor. You may nd them on our website at:
http://www.marinepc.com
APPENDIX A
APPENDIX B
Symptom: No light behind button LEDs
Possible Problem Solution
No power, loose power connection Conrm the Monitor is properly connected to a
power source.
Verify the power source is live or try another
battery or power source.
Verify the Monitor is powered on.
Reverse Polarity Check polarity of the power connection.
Symptom: Light behind button LEDs, no display, or “No Signal” error
message and/or no image on the display
Possible Problem Solution
Power on, no video signal Verify that at least one live video input is plugged
into the monitor.
Check the Brightness front panel setting on the
Monitor. This may be set too low.
Check the Brightness and Contrast controls in the
OSD. These may be set too low.
Verify that the video source is functioning prop-
erly and is outputting a video signal compatible
with the MPC-ML10DVR.
Display
Troubleshooting