User manual

18 MPC-ML10DVR-UM(B) 4/2011
ON-SCREEN DISPLAY
The On-Screen Display (OSD) User Interface is where display adjustments are made. With
its user-friendly graphical interface, the OSD Menu provides access to ne-tuning the
Display according to the User’s preferences.
OSD Menu Activation
To activate the OSD menu, press and release SELECT Button.
Note: OSD Menu closes after 30 seconds of inactivity. This setting may be adjusted in the OSD
Menu: Tools: OSD Timeout.
OSD Menu Categories
The OSD Menu is comprised of ve icons and an Exit Button; each icon represents a dis-
tinct menu category with its corresponding functions. (Figure 8)
Note: OSD Menu selections are indicated by icon only; there is no text.
INPUT
SELECTION
COLORIMAGE
ENHANCEMENT
IMAGE
SETTINGS
TOOLS EXIT
Figure 8
General Operating Instructions
• To open the OSD Menu, press (once) the SELECT Button
• OSD Menu appears across bottom of Display screen;
• Use UP or DOWN Button to move across Menu; selected icon turns yellow (Figure 9)
• As Main Menu icon is highlighted, its Submenu appears in OSD dialog box
• Press (once) SELECT Button to enter selected Main Menu icon Submenu screen
• A highlight bar is superimposed over the rst menu item
• Press UP or DOWN Button to move the highlight bar through the Submenu
• Press (once) SELECT Button to activate the highlighted Submenu item
• To Change values: press UP or DOWN Buttons, which increases (UP) or decreases
(DOWN) the value of the parameter as indicated in OSD dialog box; hold Button down
Figure 9
IMAGE
ENHANCEMENT
COLOR
IMAGE
SETTINGS
TOOLS EXITINPUT
SELECTION