User manual

MPC-ML10DVR-UM(B) 4/2011 17
OPERATOR CONTROLS
On left hand side of Display bezel are six (6)
Operator Control Buttons (Figure 7).
These Buttons are used in the basic operation
of the Display as well as when using the the
Digital Video Recorder (DVR) (See Digital Video
Recorder for instructions).
Power ON/OFF Button
• Power ON/OFF Button is identied with a
circle cut with a vertical slash
• Press and release to turn Display’s backlight
ON or OFF only, and
• Blue LEDs glow behind Buttons when
Display is powered on.
Figure 7
Brightness Controls Buttons
Brightness Control Buttons control Display Brightness. Upon unit power up, factory de-
fault is at maximum brightness.
• LARGE SUN Button: when repeatedly pressed or held down will cause the
Display’s backlight brightness to step up in increments to its brightest setting
• SMALL SUN Button: when repeatedly pressed or held down will cause the
Display’s backlight brightness to step down in increments to its lowest setting,
• Control’s lowest setting is near total black making it suitable in very subdued light, as
in night time operations, and
• Adjusted settings are maintained during power cycles (ON/OFF Button), and
• Brightness Settings return to factory default at main power recycle.
Select Button
The SELECT Button is used to access the OSD Menu.
Up Arrow Button
The UP Arrow Button is an adjustment or decision choice.
Down Arrow Button
The DOWN Arrow Button is an adjustment or decision choice.
Up
Down
Power On/Off
Brightness (Increase)
Select
Brightness (Decrease)