User manual

16 MPC-ML10DVR-UM(B) 4/2011
DISPLAY CONNECTIONS
Power / Video Connector
TVR-V accepts a standard NTSC composite video signal
from an assortment of devices. The MIL-DTL 38999 Series
1 Power and Video Connector has a 13 pin plug. J1 Pin-
out is indicated in Table 1.
Cables
Cables may be supplied by end user. Use the pinout guide below for fabrication.
Connectors are located on bottom of Display housing, from left to right: Power / Video
Input and USB Input. (Figure 6).
Connectors are physically unique to insure installer makes correct connections.
Connectors
USB Connector
MPC-ML10DVR accepts a USB signal. The MIL-DTL 38999
Series 1 USB Connector has a 4 pin plug. J2 Pin-out is
indicated in Table 2.
Ground
A location for chassis bonding ground is available on the rear of enclosure.
Table 1
Power & Video
13 Pin PLUG
MiL-dTL-38999 SerieS i
PIN
SIGNAL
1
RS-170 (3) SIGNAL
2
RS-170 (3) GND
3
RS-170 (2) SIGNAL
4
RS-170 (2) GND
5
RS-170 (1) SIGNAL
6
RS-170 (1) GND
7
+28 VDC
8
+28 VDC
9
-28 VDC GND
10
-28 VDC GND
11
CHASSIS
12
RS-170 OUT SIGNAL
13
RS-170 OUT GND
AMPH
88-569722-35P
MATE
MS27467E11B35S
STRAIN
M85049/49-2-10W
Table 2
USB
4 Pin PLUG
MiL-dTL-38999 SerieS i
PIN SIGNAL
1 +5VDC
2 USBD -
3 USBD+
4 GND
AMPH 71-533721-04P
MATE MS3116F8-4S
STRAIN Included
J1 Power / Video Input
J2 USB Input
Figure
J1 J2
GND