User manual

Figr 1
Figr 2
Figr 3
Figr 4
-5-
1. Place the unit on a clean dry at surface.
2. Place the Ice Reservoir on the unit front rst, then
push down rmly on back. Reservoir must click
into place.
Figr 1


3. Remove the Cord Storage Door by pushing down on
the release tab located on the Cord Storage Door.
Remove the power cord and plug the unit into a
standard 120 Volt wall socket. Replace the cord
storage door and position the power cord in the slot
below the cord storage release tab.
Figr 2
4. Remove the Ice Reservoir Lid using the Release Button
located on the top of the Ice Reservoir.
Figr 3


5. Fill the Ice Reservoir with ice cubes. Figr 4
6. Replace the Ice Reservoir Lid and snap closed.
7. Lift and remove the Blending Jar. The Ice Chute is
spring-loaded and can be pushed up.
8. Remove Blending Jar Lid.
9. Add appropriate amount of ingredients to the
Blending Jar for the number of drinks being made
(1, 2 or 3).
Making frozen
drinks