User manual
-12-
Check that the unit is plugged into a working power outlet.
Remove it from the unit and check that the Blending Blade Sealing Ring is
properly installed and that the Blending Jar Base is tightened.
Empty the Ice Melt Reservoir and make sure
reservoir is in place.
Follow the drink recipes included in “making frozen drinks” section and make
sure to not exceed the specied total volume.
Remove it from the unit and check for ice on the Blending Base.
WARNING: unplug the unit before removing ice from the Blending Base.
Check that the Number of Drinks Rotary Switch setting corresponds to the
amount of liquid in the Blending Jar.
Make sure to follow the recipe guide (pg.6) or
manually shave more ice until the desired consistency is achieved.
Place ngers into the Blending Jar or Ice Hopper. The blades in this
unit are sharp and could cause injury.
place Blending Jar onto Blending Base while motor is running. The
spinning Blending Base could damage the Blending Jar.
twist Blending Jar when removing. Simply lift and remove. Twisting
the Blending Jar could loosen the Blending Jar Base causing it to leak.
put hot liquid into the Blending Jar. Hot liquids could be ejected
during the blending process causing injury.
place ice, frozen foods or very cold liquids into a Blending Jar which
has come directly from a hot dishwasher. The sudden change in temperature
could cause the Blending Jar to crack.
place very hot liquids or foods into a Blending Jar that has come
directly from the freezer. The sudden change in temperature could cause the
Blending Jar to crack.
Follow the Cleaning and Maintenance instructions prior to your rst use.
unplug the unit when not in use.