User manual

Figr 1
Figr 3
Figr 4
Figr 2


-10-





1. Make sure unit is unplugged. Place on a clean dry
surface. Turn the unit so the back is facing you. Push
down on the Ice Reservoir Release Button. Lift the back
of the Ice Reservoir and remove. This will expose the
Shaving Paddle and Ice Hopper.
Figr 1
Note the location of the Shaving Blade inside
the Ice Hopper.
Figr 2



2. To Remove the Shaving Paddle: Press the button
located behind the Ice Chute. If the button cannot be
pressed, rotate the Shaving Paddle for a half turn and retry.

(Figr 3)
 (to the left) by
placing ngers in the ridges of the Shaving Paddle and
unscrew. This will expose the Ice Hopper and Shaving
Blade.
Figr 4
To re-assemble the Shaving Paddle, simply replace it
into the threaded insert and rotate clockwise. Hand
tighten only.
3. Press the two Ice Hopper release catches and lift the
Ice Hopper to remove.
Figr 4
4.
Remove the ice deector blade assembly by pushing
and sliding the u-lock upwards. Pull the ice deector
blade from the ice hopper and store in a safe place.
Figr 5
Cleaning and
Maintenance