Instruction manual

INSTRUCTIONS AND WARNINGS
FOR INFRARED HEATING PANELS
MAREX Solutions
2. SAFETY NOTES BEFORE FIRST USE
2.1. GENERAL SAFETY INSTRUCTIONS
All MAREX IR HEATING panel heaters are only suitable for use as a heating element. Any improper use
can lead to a significant danger to people, animals and the environment.
MAREX IR HEATING panel heaters are not intended to be used by persons (including children) with
reduced physical, sensory or mental abilities or lack of experience and / or knowledge, unless they
are supervised by a person responsible for their safety or have received instructions how to use
the device.
All heating panels must be kept away from children. Children should be supervised to ensure
they do not play with the device.
Heating panels are not suitable for use in rain or wet conditions, under water, and for any non-
intended use.
For all heating panels please observe the following installation instructions (see section 3).
Each MAREX IR HEATING panel heaters have a built-in safety switch that turns off the heating element
automatically, if not handled correctly (i.e. overheating at high temperatures which may, for
example, be a result of covering the heating element). By pulling the plug and after a wait of
about 10 to 15 minutes, the safety switch is activated automatically and the unit is operational
again.
2.2. SPECIAL SAFETY INSTRUCTIONS
DO NOT COVER. Warning: To avoid overheating, the heater must not be covered. Never cover
the heating panel. This can cause heat build up.
The heater is very hot in use (depending on model, up to 125C). A contact could lead to serious