User`s manual

USB100 User’s Manual
Page 6 Revision 1.2
2.4 Mounting the USB100
Attach the USB100 securely to the vessel using the included brass mounting screws or other
fasteners as shown in Figure 1 below.
Figure 1 – Mounting the USB100
2.5 Connecting the USB100
The Maretron USB100 provides a connection to an NMEA 2000
®
interface through a connector
that can be found on the end of the device (see Figure 2).
NMEA 2000
®
port
NMEA 2000
®
connector
USB (type B) connector
USB (type B) port
Figure 2 – USB100 Interface Connector