Specifications

www.maretron.com
Copyright 2009 Maretron, LLP. All rights reserved. As Maretron is constantly improving its products, all specifications are subject to change without notice. Maretron’s products are designed to be
accurate and reliable; however, they should be used only as aids to navigation and vessel monitoring, and not as a replacement for traditional navigation and vessel monitoring techniques. A prudent
captain or navigator never relies on a single source for navigation or system monitoring information. “NMEA 2000” is a registered trademark of the National Marine Electronics Association.
54
A Powertap Tee is connected to a
network backbone just like any Tee but
rather than connecting a device their
purpose is to provide “bus” power.
Maretron Powertap Tee uniquely
provides two power inputs permitting
doubled power provision for devices.
Yellow cable indicates power •
and can’t be confused with gray
network cable
Two cable lengths to match •
installation requirements
A Tee is used to tap into the trunk line
for adding a drop connection. The
standard tee is also available with a cap
for a protected diagnostic connection.
Tees can be mated with all other
devices on the network of the same
connector style.
Gold contacts for greatest reliability •
Keyed connectors for error-free •
connections
Double-ended cordsets are used
for trunk or drop lines and make
for a secure connection and simple
timesaving installation. The connectors
are keyed for error-free connection
and they are waterproof for continued
operation even while submerged in
the bilge.
Rugged, IP68 rated connectors for •
continued connection integrity in
marine environments
Various cable lengths to match •
installation requirements
Micro Double-Ended
Cordsets Micro Tee Micro/Mid Powertap Tee
MICRO