Specifications

www.maretron.com
Copyright 2009 Maretron, LLP. All rights reserved. As Maretron is constantly improving its products, all specifications are subject to change without notice. Maretron’s products are designed to be
accurate and reliable; however, they should be used only as aids to navigation and vessel monitoring, and not as a replacement for traditional navigation and vessel monitoring techniques. A prudent
captain or navigator never relies on a single source for navigation or system monitoring information. “NMEA 2000” is a registered trademark of the National Marine Electronics Association.
62
A Powertap is connected to a network
backbone just like any Tee but rather
than connecting a device, its purpose
is to provide “bus” power. Typically
a Powertap is placed as central as
possible between total devices on
backbone. Maretron Powertap uniquely
provides two power inputs permitting
doubled power provision for devices.
Connects power supply to NMEA •
2000
®
Trunk Line in convenient
plug/play fashion
Replaceable fuses to protect bus •
and connected components from
excessive current
A Tee is used to tap into the trunk line
for adding a drop connection. Two Mini
Tees are available: 1) a Mini Tee with
Mini connectors for the trunk and drop
lines, and 2) a Mini/Micro Tee with Mini
connectors for the trunk lines and a
Micro connector for the drop line.
Gold Contacts for greatest •
reliability
Keyed connectors for error-free •
connections
Double-ended cordsets are used
for trunk or drop lines and make
for a secure connection and simple
timesaving installation. The connectors
are keyed for error-free connection and
are waterproof for continued operation
even while submerged in the bilge.
Rugged, IP67 rated connectors for •
continued connection integrity in
marine environment
Various cable lengths to match •
installation requirements
Mini Powertap /
Mini Power CordMini Tees
Mini Double-Ended
Cordset (Blue)
MINI