User`s guide

7
2
ND
TIME
Nemo Excel allows you to set a second time.
This can be particularly useful when traveling
between different time zones (fig. 15).
Fig. 15
NOTE
The format for the second time (12h-24h)
will be the same as that chosen for the
first one.
To enable the second time zone, scroll to the
“Set Time - 2
nd
Time” item and then press the
<enter> button (the “ON” message appears on
the display bar). Press the <enter> button again
to begin setting the second time, proceeding in
the same way as for the first time.
When it is enabled, the second time will
appear on the primary time display.
NOTE
This icon appears in Time Mode
to indicate that the second time is
active.
SET TEMP
The Set Temp item in the Set Time menu
selects the units of measurement for
temperature (degrees Celsius or Fahrenheit), by
setting either metric or imperial units (fig. 16).
Fig. 16
SET BEEP
The settings for the time signal (beep on the
hour) apply only to the Time Mode functions
(fig. 17).
Fig. 17
SET HOURBEEP
If the Hour Beep item is set to “ON”, Nemo
Excel will sound a short beep at the beginning
of every hour.
STOPWATCH
The Time Menu also includes a stopwatch
function (“Stopwatch”).
Within this function, the <+> button is used for
starting and stopping the clock.
The <-> button clears the time if pressed when
the stopwatch is halted, or records a split (lap)
time if pressed while the stopwatch is running.
The lap time is displayed for10 seconds,
together with a blinking “LAP” caption. During
this time it is still possible to press the <->
button to record a new lap time, or press the
<+> button to stop the clock (fig. 18).
Fig. 18
To exit the stopwatch function it is necessary to
stop the clock and then press the <esc> button.
TIME
This is the normal (default) display mode of
the Nemo Excel dive computer. As briefly
described in the quick guide, the <+> or
<-> buttons can be used to view additional
information: date, second time, alarm,
temperature. These details are displayed for
10 seconds.
After a dive in AIR or EAN or BT mode, Nemo
Excel will continue to display the desaturation
and no-fly times until both have gone to zero.
In the case of Nitrox dives, the percentage
•
•
CNS value is also displayed. However, even
when these values are being displayed, it is
still possible to view the additional information
listed above (fig. 19).
Fig. 19
NOTE
this icon remains on until the no-fly
time has gone to zero.
PERSONALIZE DISPLAY
The Nemo Excel display can be personalized
so that it shows one of the following additional
details on the display bar.
• date;
• second time;
• empty field (default).
To personalize the display, scroll to the desired
additional item using the <+> or <-> buttons.
Before the 10 seconds of display elapse, press
the <-> button for 2 seconds (fig. 20).
Fig. 20
To revert to the default empty field, simply
scroll to the empty field item and press the <->
button for 2 seconds (fig. 2).