User`s guide

Nemo Excel dive computer
6
SET TIME
Set Time is used for setting all the information
which appears on the instrument in Time
Mode.
Set Time comprises (fig. 12):
Fig. 12
Adj Time: set the time, its format (12 or 24 hour),
and date.
Alarm: set and turn on/off the alarm.
2
nd
Time: enable and set a second time zone.
Temp: select the units of measurement.
Beep: enable time signal.
As described in the chapter “Shortcut to Set
Time Functions”, to provide quicker access
to the settings the Set Time function can be
invoked directly from Time Mode.
• ADJ TIME
As already described briefly in the quick guide,
the Adj Time menu is used for setting the
date and time of the first time zone. It is also
possible to choose the format for the primary
time display(12h - 24h) (fig. 13).
Fig. 13
In Set Time, press the <+> or <-> buttons until
“Adj Time” appears on the display bar and press
the <enter> button to accept the item.
Use the <+> or <-> buttons to adjust the values.
Press and release the button to change the
value by one unit at a time, or hold down the
button for rapid increment or decrement. Press
the <enter> button to save the changes made.
As illustrated in the figures, you must first set
the time, followed by the format, and finally
the date.
The chosen time format will be used in all the
Nemo Excel operating modes: alarm, second
time zone, log book, dive, stopwatch.
NOTE
Pressing <esc> during the settings cancels
any changes made and reverts to the
preceding value;
pressing <enter> during the settings
accepts the changes made and advances
to the next item or returns to the higher
menu level.
ADJ ALARM
The alarm is referred to whichever time is on
the primary display, which can be either the
first or second time zone.
The following paragraph explains how to
enable and set a second time zone.
NOTE
the alarm time format (12h - 24h) depends
on the selection made for the primary time
display.
To set the alarm, access Set Time - Alarm and
press the <enter> button to enable the alarm
(the “ON” message will appear on the display
bar) (fig. 14).
Fig. 14
Press the <enter> button again to access the
function for setting the alarm time.
If the alarm is turned on, Nemo Excel will
sound for one minute at the programmed time.
To silence the alarm, press any one of the
buttons.
NOTE
Nemo Excel will automatically re-activate
the alarm for the following day; to avoid
this, go back to SET TIME ALARM and turn
the alarm “off”.
NOTE
The alarm function is disabled when Nemo
Excel is in DIVE mode.
NOTE
In Time Mode this icon indicates
that the alarm is on.
In Dive - Free Dive mode, instead,
it indicates that the audible alarms
are enabled.