Operation Instruction

2. Locking doors
1. Stop the engine and get out of your vehicle with your remote controller.
2. Close all the doors.
3. Push the door handle request switch or the back door handle request switch.
4. All doors will lock.
3.Unlocking doors
1. Push the door handle request switch.
・The driver door unlock Front passenger side or back door.
・Only corresponding door unlocks.
4.OPERATING THE ENGINE
・ LOCK（Normal parking position)
This position activates only lock/unlock the door functions.
・ ACC(Accessories)
This position activates electrical accessories such as the radio, when the engine is
not running.
・ ON(Normal operating position)
This position turns on the ignition system and electrical accessories.
・ START
This position is starts the engine.
Starting the engine
When driving the vehicle, be sure to carry the remote controller.
1. The shift knob located in the Parking position.
2. Securely depress the brake pedal.
3. Securely push the push engine start switch and the engine will be started.
△ WARNING
Do not start the engine from outside the vehicle through the window. Doing so could
lead an accident and injury. Be sure to sit in the driver seat to use the remote
controller.