Owner's Manual

www.puretecfitness.com
5
ATTACHING THE STABILISER FRAME
The use of the hook is to hitch the spring to the hole on
the legs
in the event the spring requires re-attaching
1. Now find the two bottom halves of the stabilising bar. You will see
that
the Trampoline surface has two legs with attachments. These
are the openings that you will use to place the stabilising bar’s two
bottom halves. Take the end that slides into the leg attachment and
securely place it in the attachment opening (Image 1).
2. Repeat step 2 for the second bar.
3. This is how the Marcy Trampoline should look after step 2
(Image 2).
4. Find the two parts that make up the top of the stabilising bar and
tightly lock both padded ends together (Image 3).
5. Now place both ends of the top half of the stabilising bar on the
openings of the two bottom halves (Image 4).
6. After making sure that all of the parts are tightly secured your
Marcy Trampoline should look like the picture (Image 5).
Image 1
Image 2
Image 3
Image 4
Image 5