Installation & Assembly

Assembly Instructions
Activity Table Legs
Tools required Hardware (Included)
Customer Service Hours:
Monday-Friday 8:30am to 4:30pm CST
(Except holidays)
Toll-Free 888-627-2601
[e-mail]
Marco Group, Inc.
5400 Doniphan Dr.
Neosho, MO 64850
417-455-9663 - Phone
417-455-0057 - Fax
www.marcogroupinc.com
Phillips Screwdriver
5/16”-18 x 1/2” Screw #12 x 3/4” Screw
Leg Base
Adjustable Leg
A
B
A
x 4
B
x 32
Leg Bracket
1. Your table may have one of two different pre-drilled hole patterns. Please refer to the image below that matches
your table.
2. Attach Leg Bracket to table with screws “B”. (If table was received with Leg Brackets attached skip to Step 3)
3. Slide Leg Base under lip of Leg Bracket until seated & pre-drilled screw holes are visible through Leg Base holes.
4. Fasten Leg Base to table with (2) screws “B”.
5. Insert Adjustable Leg into Leg Base at desired height and attach with (1) screw “A”.
6. Repeat for remaining legs.
#85259
Rev. 10-30-18
B
HOLE PATTERN “A”
HOLE PATTERN “B”
5 Screws
B
6 Screws
Leg Bracket
Leg Base
B
Adjustable Leg
A