Installation Guide

INSTALLATION INSTRUCTIONS | TRIM TILE | PAGE 1 of 2

Photo features EpicClean Milton Arabescato Marble

3 in. x 12 in. Bullnose Trim Tile

BULLNOSE

TRIM TILE

CONTINUED ON NEXT PAGE

Walls: If you’re tiling a backsplash or accent wall, unﬁnished edges that don’t

match up with the wall will be visible. Placing a row of bullnose tiles around the

perimeter of your design yields a more ﬁnished look. To determine the types of

bullnose tiles that are available, check out the trim pieces that match the tile you

choose.

Floors: A row of bullnose tiles can take the place of a wooden baseboard and

give any bathroom ﬂoor a ﬁnished look. This added moisture protection will also

help to preserve the bottom portion of your walls.

Corners: Bullnose tiles can also be used to smooth out sharp edges on tub

surrounds or countertops. The outermost edges of shampoo niches can also be

ﬁnished with bullnose rather than standard tile. And for bathrooms that feature

a tiled privacy wall, bullnose tile can be used to soften sharper edges. This will

not only streamline the overall design, but will also help to protect anyone who

brushes up against the wall.

Decorative trim: Bullnose tiles can also be used as decorative trim or on the top

of a half-tiled accent wall

TYPES OF TRIM TILE WHERE TO USE

Square Bullnose Corner Bullnose

Rectangular Bullnose

PAGE 1
BULLNOSE TRIM TILE Photo features EpicClean Milton Arabescato Marble 3 in. x 12 in. Bullnose Trim Tile TYPES OF TRIM TILE WHERE TO USE Walls: If you’re tiling a backsplash or accent wall, unfinished edges that don’t match up with the wall will be visible. Placing a row of bullnose tiles around the perimeter of your design yields a more finished look. To determine the types of bullnose tiles that are available, check out the trim pieces that match the tile you choose.
PAGE 2
JOLLY TRIM TILE TYPES OF TRIM TILE Jolly Trim Tile INSTALLATION INSTRUCTIONS | TRIM TILE | PAGE 2 of 2 Photo features Milton Arabescato Marble 1/2 in. x 12 in. Jolly Trim Tile WHERE TO USE Jolly trim is a linear trim or edge for tile. It can be ceramic or metal. It is used to finish a raw tile edge just like a bullnose tile. It can also be used as a liner to accent your design. It’s generally very narrow and long with a minimal profile, measuring about 1/2 x 12 x 1/4.