Installation Guide

Photo features Zellige™
Argilla 4 in. x 4in. Wall Tile
Installation of
COUNTERTOP
& WALL TILE
INSTALLATION INSTRUCTIONS | COUNTERTOP & WALL TILE | PAGE 5 OF 6
STEP 8: SEALING (STONE TILE ONLY)
8
• Penetrating/impregnating stone
sealers are a no-sheen, natural-look
sealer that can be water-based or
solvent-based.
• A premium, natural-look, penetrating
impregnating sealer is the best choice
when you are wanting to maintain the
natural color of the stone. A stone
enhancer sealer is often used when a
darker, enriched, or highlighted
character is desired.
• Make sure the brand you have chosen is
formulated to provide maximum stain
protection for stone products.
• Stone products should be tested
periodically to ensure that the sealer is
working effectively.
CONTINUED ON NEXT PAGE
STEP 7: CLEANING
7
• The complete removal of grout and
construction dirt after products have
been installed will improve daily
maintenance.
• Clean successfully by scrubbing the
installation with hot water and a pH
neutral liquid cleaner (soapless),
followed by a thorough rinsing. Finally,
remove the rinse water with a wet
vacuum or dry toweling.
• If some residue remains, futher cleaning
will need to be done in consultation
with the grout manufacturer.
• For more aggressive cleaning, scrubbing
machines equipped with nylon pads or
brushes should be used. Wet
vacuuming of the suspended dirt and
grout is recommended.
NOTE: Natural stones may darken
when wet or when in contact with
humidity.