Specifications

MARATHONNORCO AEROSPACE, INC.
NICKEL-CADMIUM AIRCRAFT BATTERIES
24-34-00
INTRO-1
MAY 10/11
INTRODUCTION
This manual contains shop verified instructions for proper installation, operation and maintenance of
MarathonNorco’s Nickel-Cadmium batteries. These instructions are grouped in topics shown in the Table
of Contents. They are for the operation, testing, and repair of MarathonNorco’s battery products.
This manual is designed to service the batteries based on the cell type within the battery. Batteries covered
by this manual are listed within the INTRO section. This listing identifies the applicable cell type used within
the battery to establish the servicing criteria listed in the various tables and charts within this manual.
WARNING: SERIOUS INJURY CAN RESULT FROM CARELESSNESS WHILE HANDLING AND
WORKING WITH NICKEL-CADMIUM BATTERIES. PLEASE OBSERVE THE
FOLLOWING SAFETY RULES WHILE WORKING WITH THESE BATTERIES.
1. Remove all metal articles such as bracelets and rings.
2. Metal tools must be insulated.
3. Wear protective clothing and eye protection. The electrolyte can cause burns if in contact with skin or
eyes.
4. Do not smoke or hold naked flames near batteries on charge. These batteries give off a mixture of
oxygen and hydrogen during charge, which, if allowed to accumulate in a confined space, could cause
an explosion. Do not charge the battery on the bench with the cover on.
5. Do not mix lead-acid and nickel-cadmium battery servicing in the same shop area.
6. Do not use petroleum spirits, trichloroethylene or other solvents.
READ AND UNDERSTAND THE CAUTIONS AND WARNINGS STATED THROUGHOUT THIS MANUAL
BEFORE PROCEEDING WITH SERVICING PROCEDURES.
CARELESSNESS MAY RESULT IN THE RAPID AND UNCONTROLLED RELEASE OF ELECTRICAL,
CHEMICAL OR HEAT ENERGY.