System information

4-4 Endurance FTvirtual Server Administrator’s Guide
The first time you launch the Endurance Manager, if your local host is a CoServer or FTvirtual
Server in a Endurance Configuration, you will be connected to the last host automatically. If the
local host is not in a Endurance Configuration, the Connect to Host dialog is displayed, and you
can specify a host in a Endurance Configuration to monitor.
Subsequent launches of the Endurance Manager connect you automatically to the last host to
which you were successfully connected. Optionally, you can access the Connect to Host dialog
box.
The first time you launch the Endurance Manager, the default value in the Server Port Number
list box is 2809 for a new connection. This is the port number to which the System Management
Service responds. The next time you launch the Endurance Manager, the Server Port Number
field defaults to 2809 or to the last port number that connected successfully with the server to
which you connected. Check with your system administrator if you are not sure which port
number is being used.
Table 4-1 describes the settings in the Connect to Host dialog box.
Table 4-1 Connect to Host Settings Descriptions
Setting Description
Specify Host
Name
The first time this window is raised, only the local host is listed in this box. Type or
select the hostname of the host to which you want to connect. The Endurance
Manager saves the specified host name and tries to reconnect to the most recently
viewed host. It displays the name of that host when you run the Endurance
Manager again.
Server Port
Number
Type the port number of the host to which you want to connect. The default port
number is 2809.
<status> Displays a progress report about the connection being made.
Connect Connects directly to the named host. To connect to a host not displayed in the drop-
down list, type a name in the Specify host name box, and then click Connect.
Close Closes the Connect to Host dialog box without having any effect on the connection
to the host.
Abort Stops the connection attempt, but does not close the Connect to Host dialog box.
Help Launches the online help for the Connect to Host dialog box.
Close dialog
box when
successful
connection is
completed.
Closes the Connect to Host dialog box after the connection to the host is made.