System information

Endurance Device Redirector 3-35
7 Windows 2003: Select the
Update Network Connections
adapter names box.
Windows 2000: Select the
Update Network and Dial-up
Connections adapter names
box.
Instructs the Network Setup Wizard to change the
friendly name of the adapters to those shown in the
Role list.
8 Click Apply. The Network Setup Wizard removes all binding for the
deconfigured redirected adapter.
9Answer No when prompted to
run the Device Redirector to
autoconfigure the redirected
adapters.
10 Click Exit on the Settings
Applied dialog. If you are
running on CoServer 1, repeat
steps 2-10 on CoServer 2.
Otherwise proceed to step 11.
11 Run the Endurance FTvirtual
Server desktop and log onto the
FTvirtual Server using an
account with administrator
privileges.
12 From the Endurance taskbar,
select Launch Device
Redirector. Click OK in
response to the Connections
dialog.
13 Double click on Networks under
FTvirtual Server devices.
Right click on the adapter you
wish to remove, and select
Remove. Click Yes in response
to the Remove Ethernet dialog.
The Device Redirector removes the selected Ethernet
adapter from the Endurance Configuration.
14 Repeat step 13 for each
redirected adapter that is
numerically higher than the one
you just removed in step 13, and
click Remove. Click Yes in
reponse to the Remove
Ethernet dialog.
You cannot leave gaps in the redirected adapter
numbers. You must reassign each adapter numbered
above the one you just removed.