System information

3-30 Endurance FTvirtual Server Administrator’s Guide
5 Windows 2003: Select Update
Network Connections adapter
names.
Windows 2003: Select the Update
Network and Dial-up Connections
adapter name.
Instructs the Network Setup Wizard to change
the friendly name of the adapter to that shown
in the Role list.
6 Click Apply on the Apply Settings
dialog.
Network bindings and addresses are modified
to reflect the new designation for the adapter.
7 Click Exit.
If you are running on CoServer 1,
repeat steps 2-7 on CoServer 2.
Otherwise, proceed to step 8.
8 Run the Endurance FTvirtual Server
Desktop and log onto the FTvirtual
Server using an account with
administrator privileges.
9 Right-click on the Endurance taskbar
icon and select Launch Device
Redirector. Click OK in response to
the Connections dialog.
The Device Redirector starts.
10 Right-click on Networks under
FTvirtual Server Devices and select
Add.
Displays a dialog in the right-hand pane that is
used to configure the new redirected network
adapter. Refer to Figure 3-8.
Step Action Notes