System information

3-16 Endurance FTvirtual Server Administrator’s Guide
Updating Device Settings When Adding CD-ROMs, Medium
Changers, and Tape Drives
To update device settings when you add a CD-ROM, medium changer, or tape drive:
Step Action Notes
1 Click on the appropriate icon for either
CDROM, Medium Changer, or Tape
Drives.
2 Choose Actions Add
or
right-click CDROM, Medium
Changers, or Tape Drives Add.
3 Select a device on one of the
CoServers.
The default FTvirtual Server Address and the
Physical Address of the CDROM, medium
changer, or tape drive on the CoServer are
displayed.
The FTvirtual Server Address is the setting
that the FTvirtual Server uses to reference the
device. The system checks that the FTvirtual
Server Address that is displayed is not in use.
If you want to change the FTvirtual Server
Address, enter information for:
• Port number (a value between 0 and 2)
• Bus number (a value between 0 and 7)
• ID (a value between 0 and 127)
• LUN – logical unit number (a value between
0 and 254).
4 Optionally, enter a description for the
device.
The description is displayed in the comments
field on the device property page.
5 Click OK. If the information displayed on this screen is not
correct, click Cancel, and add the CD-ROM,
medium changer, or tape drive again with the
correct device settings.
6
Select File Write Device Settings to
save the settings.