System information

Endurance Device Redirector 3-15
To update device settings when you replace an existing disk, CD-ROM, medium changer, or
tape drive:
Step Action Notes
1 Click on the physical device
that you want to replace.
• For example, the disk might be CoServer1[3:0:1:0].
• For a mirrored device, use Endurance Manager to
ensure the device is failed, disabled, or unknown.
• For a non-mirrored device, ensure the device is failed or
unknown.
• Alternatively, remove the logical device and add the
desired device back into the configuration.
2 Choose Actions Replace
or right-click on the physical
device icon, then choose
Replace.
The FTvirtual Server Devices Disk Drives (or
CD-ROMS, Tape Drives, or Medium Changers) dialog
box displays the devices on the CoServers.
The devices that you can configure are active (for example,
the CD-ROMs on CoServer1). The appropriate devices on
the other CoServer are grayed out.
The Device Redirector displays the Physical Address of
the device that you are replacing.
3Click OK. If the information displayed on this screen is not correct,
click Cancel, and reselect the device you want to replace.
4
Select File Write Device
Settings to save the settings.
If you replaced a device, you must save the new settings by
selecting File Write Device Settings before you can
add, remove, or replace another device.