System information

3-14 Endurance FTvirtual Server Administrator’s Guide
Updating Device Settings When Replacing Devices
You also can use the Endurance Device Redirector to update device settings when you replace
disks, CD-ROMs, medium changers, or tape drives due to the following circumstances:
• You can replace a mirrored disk member if it is disabled or failed.
• You can replace a non-mirrored disk if it is failed.
• You can replace any missing device.
If you added or removed a disk, you must save the device settings by selecting File Write
Device Settings before you can replace the disk. If you attempt to replace a disk without having
first saved the device settings before you begin, a warning message displays, indicating there is
a pending change to the device settings. If this message displays, acknowledge the warning,
save the device settings, and then repeat the steps to replace the disk.
Follow the procedures described in the next table to update device settings when you replace
disks. Figure 3-4 shows the screen used to replace disks. To update device settings when you
replace CD-ROMs, medium changer, and tapes, you use a similar dialog box and procedures.
Figure 3-4 Replace Disks Screen