System information

3-12 Endurance FTvirtual Server Administrator’s Guide
Table 3-4 describes the buttons available when using the Add or Replace wizard, or in the case
of the Edit button, when you want to change properties.
To update device settings when you add a disk:
Table 3-4 Endurance Device Redirector Button Information
Button Description
Edit Allows changes you can modify to properties in the right pane.
OK Accepts the information on the current screen.
Cancel Cancels any changes you have made to the device settings since the last
time the device settings were saved.
Help Displays the online help for the current page of the Endurance Device
Redirector.
Step Action Notes
1 Click on the Disk Drives icon.
2 Choose Actions Add
or
right-click, then choose Add.
The FTvirtual Server Devices Disk Drives
dialog box displays the disks that are eligible for
redirection.
3For a mirrored set:
a. Ensure that the Mirrored box is
checked.
b. Select a physical disk on
CoServer1.
c. Select a physical disk on
CoServer2.
For a non-mirrored disk:
a. Ensure that the Mirrored box is
unchecked.
b. Select a disk on one of the
CoServers.
The utility displays the Physical Address of the disk
on CoServer1, on CoServer2, and the default
FTvirtual Server Address.
The FTvirtual Server Address is the setting that the
FTvirtual Server uses to reference the disk. The
system checks that the FTvirtual Server Address
displayed is not in use. If you want to change that
address, enter information for:
• Port number (a value between 0 and 7)
• Bus number (a value between 0 and 7)
• ID (a value between 0 and 127)
• LUN – logical unit number (a value between 0 and
254)
4 For the FTvirtual Server boot device,
ensure that the Boot Device box is
checked.
When you add mirrored disks to your Endurance
Configuration, you need to designate the FTvirtual
Server boot disk. CoServer boot disks need not be
configured and are not included in the list of available
disks.