System information

3-6 Endurance FTvirtual Server Administrator’s Guide
Table 3-2 describes the Toolbar icons.
Networks Each network connection provides a communication path between
the Endurance FTvirtual Server and a local area network.
Ethernet devices are paired with one network interface card
installed in each CoServer. Together, they are seen by the
FTvirtual Server as a single device.
Tape Dri ves All tape drives are non-mirrored SCSI tape drives.
Device Setting
Conflicts
Some devices have settings that are not consistent or correct.
Device Setting
Errors
Specified devices are not configured consistently or correctly.
Missing
Device
Specified device is physically missing.
Table 3-2 Endurance Device Redirector Toolbar Icons
Toolbar Icons Use this tool to...
Connections Display the Connections dialog box. Known CoServer names are
listed by default. You must specify any missing CoServer name(s),
browsing to them if necessary.
Disconnect Disconnect from the CoServers
Read Device
Settings
Open the current device settings of the running system.
Write Device
Settings to the
system
Store the current device settings in the running system, overwriting
any existing device settings information.
Exit
application
Close the Endurance Device Redirector.
Display the
application
help file
Display the help file of the Endurance Device Redirector.
What’s this
help
Display a brief description of an object on the screen.
Table 3-1 Endurance Device Redirector Icons (Continued)