System information

6-2 Endurance FTvirtual Server Administrator’s Guide
MTCCONS
You can execute Endurance commands from an MS-DOS window. The primary purpose for
using MTCCONS (Endurance Management console commands) is to execute scripts for system
validation (test) or routine system management.
When using MTCCONS, enter the command syntax and any required parameters.
Note: We recommend that you set your current directory to the Endurance area in
Program Files before using MTCCONS commands.
Each command has the following components: Prefix, Target, Verb, Operation type, Executed
from and any associated Parameters. For example:
To use MTCCONS commands, you must enter MTCCONS as the Prefix for every Endurance
console command. Depending on the command, the other fields vary from command to
command.
Table 6-1 lists and describes the MTCCONS parameters.
Table 6-1 MTCCONS Parameters
Parameter Description
-a Appends data to a file
-all Shows all data fields
-desc Prints a description of the command
-height Screen buffer height
-o Writes data to a file
-disable_safeguard Allows you to execute commands that may compromise the availability of the
FTvirtual Server. For example, you might remove the only active CoServer from
the Endurance Configuration.
-v Verbose displays output labels, values, and units
MTCCONS
Parameter
Executed from
Operation Type
Verb*Target*Prefix
* Target and Verb are not order dependent. The command line syntax allows you to enter target,
then verb, or vice versa.
VS1 Remove
From Configuration
From CoServer2
-disable_safeguard