System information

Endurance Manager 4-53
Using the Endurance Manager on a Remote Workstation
You can use the Endurance Manager on a remote workstation to monitor and administer your
Endurance Configuration. To do so, connect the Endurance Manager on a remote workstation
to the Endurance Configuration using a LAN, a RAS connection, or a virtual private network
over the Internet. After you install Endurance Manager and establish the remote connection, you
can use all of the Endurance Manager features and options to monitor and/or administer the
Endurance Configuration.
When using the Endurance Manager on a remote workstation:
• Enter the FTvirtual Server computer name for the Endurance Configuration that you want
to monitor in the Specify Host Name setting on the Connect to Host dialog box.
Alternatively, if a CoServer is accessible over the network, you can enter the CoServer’s
computer name for the Endurance Configuration that you want to monitor.
• When the Endurance Manager is connected to a remote Endurance Configuration, the
computer name of that Endurance Configuration is displayed at the bottom of the main
window.
• Using Microsoft’s Remote Access Server and the Endurance Manager, if you have the
appropriate administrative privileges, you can use a remote workstation to administer your
Endurance Configuration. Depending on your remote Endurance Manager configuration,
this combination provides access to either or both CoServers.