System information

Endurance Manager 4-47
Disk Options
To work with disks, select either mirrored or non-mirrored disks, and then select a particular
disk.
Table 4-20 describes the options for the disks.
Table 4-20 Disk Options
Option Description Notes
Mirrored Disks
Diskn The mirror set name
Restart Mirror
Copy
Restarts a failed mirror copy
for a disk.
MIrror Copy
Status. . .
Raises the Mirror Copy Status
window for the selected disk.
CoServern.Diskn
Disable Disables an individual mirrored
disk that is Good or Offline.
After a disk is disabled, you can use it
again only if you explicitly enable it. A disk
remains disabled across CoServer reboots.
Enable Enables a mirrored disk that is
Disabled or Failed.
The disk is enabled without having to
reboot the CoServer under most
circumstances. Use this option to enable a
disk following a repair or replacement.
Reset
Endurance
Sector
Initializes a replacement disk. Use this option to recover from failures
resulting from invalid data on the
Endurance sector, or to initialize a new
disk.
Set Accessible to
CoServer
Makes the selected disk read-
only and accessible to the
CoServer.
This option is only available for redirected
disks.
Remove CoServer
Access
Makes a currently accessible
disks inaccessible to the
CoServer
This option is only available for redirected
disks.